:
from
to
Clear
Clear
ACE BACKSTAGE ISO24BAC DW Back Access Cover with Isolation Bracket
SKU: ACE ISO24BAC
Isolated Back Access Cover for Double Wide Stage Pockets
The #22BAC, #23BAC and #24BAC are closures for the back access opening on the ACE Full Pockets, Half Pockets, and Double Wide Pockets, respectively. The BAC provides 1/2” and 3/4” combination conduit knock-outs for easy conduit terminations. Use the BAC with Half, Full, or Double Wide Pocket installations requiring wiring closure (larger ACE #BBX Series Back Boxes, #PE, and, #FP3E Electric Panels cannot be used with the BAC). The BAC is easy to install onto the Half, Full, or Double Wide Pocket body and permits many options in a typical installation sequence.
The BAC is precision formed to slide onto the back access opening of the pocket body. During rough-in the BAC may be connected to the combination knock outs, 1/2” or 3/4”, with flex conduit and temporarily left tacked to the floor joist approximately where the pocket is to be installed. All wire can then be pulled and low voltage terminations to various connectors completed and ready for final installation into the pocket. The BAC is smaller than the cutout in the stage floor and can easily be pulled through the cutout for assembly to the pocket body. Two self-tapping sheet metal attachment screws are provided.
#ISO22BAC and #ISO24BAC closures come with a galvaneal isolation bracket installed to support separation between high and low voltage in ACE Stage Pockets. The pocket assembly can then be dropped into the stage cutout and all the panel/plate sub-assemblies finally installed. The BAC provides a closure for the open back access architecture of the Double, Full and Half Pockets while maintaining the benefits of easy installation. The sequence of installation can be varied such that all terminations are completed early in the job. At final installation simply screw the parts together and screw the pocket into floor. Or wait until the final install phase and do all the terminations, assembly and pocket body installation.
FEATURES
SIMPLE CLOSURE:
The simple device closes the back access opening on ACE Half, Full, and Double Wide Pockets easily.
FLEXIBILITY:
Provides 1/2" and 3/4" combination conduit knock-outs for easy conduit terminations.
DURABLE CONSTRUCTION:
Precision die formed to exactly match the back access openings of ACE Stage Pocket bodies.
TIMELY ASSEMBLY:
The sequence of installation can be varied such that all terminations are completed early in the job or wait until the final install phase and complete all the terminations, assembly, and pocket body installation.
ISO24BAC Series Back Access Cover Size = 4.171” W x 3.562” H x 16.125" L
The BAC is precision formed to slide onto the back access opening of the pocket body. During rough-in the BAC may be connected to the combination knock outs, 1/2” or 3/4”, with flex conduit and temporarily left tacked to the floor joist approximately where the pocket is to be installed. All wire can then be pulled and low voltage terminations to various connectors completed and ready for final installation into the pocket. The BAC is smaller than the cutout in the stage floor and can easily be pulled through the cutout for assembly to the pocket body. Two self-tapping sheet metal attachment screws are provided.
#ISO22BAC and #ISO24BAC closures come with a galvaneal isolation bracket installed to support separation between high and low voltage in ACE Stage Pockets. The pocket assembly can then be dropped into the stage cutout and all the panel/plate sub-assemblies finally installed. The BAC provides a closure for the open back access architecture of the Double, Full and Half Pockets while maintaining the benefits of easy installation. The sequence of installation can be varied such that all terminations are completed early in the job. At final installation simply screw the parts together and screw the pocket into floor. Or wait until the final install phase and do all the terminations, assembly and pocket body installation.
FEATURES
SIMPLE CLOSURE:
The simple device closes the back access opening on ACE Half, Full, and Double Wide Pockets easily.
FLEXIBILITY:
Provides 1/2" and 3/4" combination conduit knock-outs for easy conduit terminations.
DURABLE CONSTRUCTION:
Precision die formed to exactly match the back access openings of ACE Stage Pocket bodies.
TIMELY ASSEMBLY:
The sequence of installation can be varied such that all terminations are completed early in the job or wait until the final install phase and complete all the terminations, assembly, and pocket body installation.
ISO24BAC Series Back Access Cover Size = 4.171” W x 3.562” H x 16.125" L