:
from
to
Clear
Clear
ACE BACKSTAGE PNL-140 Aluminum Super Panel Blank 9.032"H x 7.380"W
SKU: ACE PNL-140
Aluminum CONNECTRIX Pocket Panel, Blank (9.032"H x 7.380"W)
The CONNECTRIX System expands connectivity possibilities utilizing a unique panel cutout detail and an array of standard and new isolated connectors. This system provides more connectors and mounting options in stock ACE panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery. The CONNECTRIX Pocket Panels (#MP-100, #PNL-100, #PNL-120, #PNL-140) are flat and strong. The Panels are made from high strength aluminum alloy (6061-T6) that is .062” thick.
Using the CONNECTRIX System Panel it is possible to mount various combinations of CONNECTRIX Connectors without a single custom punch. By implementing the #C-15100, #C-25100, or #C-27100 Series of connectors, ACE can create a custom Stage Pocket Panel that will work in most any installation applications. Connectors are loaded into panels using black, aluminum pop rivets. You may also choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. All ACE CONNECTRIX System Panels will mount separately or in combination in all ACE Stage Pockets.
Many pre-cut stock #MP-100, #PNL-100, #PNL-120, and #PNL-140 Series CONNECTRIX System Connector Panels are stocked and available for immediate loading and engraving. Standard CONNECTRIX Panels are created from high strength, tough, aircraft aluminum alloy (6061-T6) that is 1/16" (.062") thick. The standard panels mount with (4 or 6) self-tapping screws. Each panel is CNC machined to precisely mate with the designated connectors and in the pocket mounting holes. Each Standard CONNECTRIX Panel is finished with oven cured semi-gloss black powder coat.
Most CONNECTRIX Panels provide header space for custom labeling. Labeling the standard blank panel allows you to identify inputs, company calling-card information, or your graphic logo design directly on the panel. ACE standard panels are flat, strong, and rigid like typical mild steel panels. Because the panels are machined and not punched they stay flat and undistorted. The machined CONNECTRIX cutouts combine popular mounting patterns of the Neutrik "D" series and Switchcraft "E" series standard connectors. The adaptor mount is plastic and provides ground isolation between the panel and connector.
Using the CONNECTRIX system panel it is possible to mount any combination of modular jacks (RJ45, RJ11 etc.), BNCs, dual RCAs, mic jacks, speaker jacks and numerous other standard connectors without a single custom punch. This system provides for more connectors and mounting options in stock standard ACE panels. The benefit is faster order turn around and lower cost. Less custom fabrication for custom spec results with off-the-shelf stock prices.
Using the CONNECTRIX System Panel it is possible to mount various combinations of CONNECTRIX Connectors without a single custom punch. By implementing the #C-15100, #C-25100, or #C-27100 Series of connectors, ACE can create a custom Stage Pocket Panel that will work in most any installation applications. Connectors are loaded into panels using black, aluminum pop rivets. You may also choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. All ACE CONNECTRIX System Panels will mount separately or in combination in all ACE Stage Pockets.
Many pre-cut stock #MP-100, #PNL-100, #PNL-120, and #PNL-140 Series CONNECTRIX System Connector Panels are stocked and available for immediate loading and engraving. Standard CONNECTRIX Panels are created from high strength, tough, aircraft aluminum alloy (6061-T6) that is 1/16" (.062") thick. The standard panels mount with (4 or 6) self-tapping screws. Each panel is CNC machined to precisely mate with the designated connectors and in the pocket mounting holes. Each Standard CONNECTRIX Panel is finished with oven cured semi-gloss black powder coat.
Most CONNECTRIX Panels provide header space for custom labeling. Labeling the standard blank panel allows you to identify inputs, company calling-card information, or your graphic logo design directly on the panel. ACE standard panels are flat, strong, and rigid like typical mild steel panels. Because the panels are machined and not punched they stay flat and undistorted. The machined CONNECTRIX cutouts combine popular mounting patterns of the Neutrik "D" series and Switchcraft "E" series standard connectors. The adaptor mount is plastic and provides ground isolation between the panel and connector.
Using the CONNECTRIX system panel it is possible to mount any combination of modular jacks (RJ45, RJ11 etc.), BNCs, dual RCAs, mic jacks, speaker jacks and numerous other standard connectors without a single custom punch. This system provides for more connectors and mounting options in stock standard ACE panels. The benefit is faster order turn around and lower cost. Less custom fabrication for custom spec results with off-the-shelf stock prices.