NC5FAV-SW A SERIES 5 PIN XLR FEMALE

A Series
The `State of the Art`receptacle.Round plastic body XLR pcb mount panel connector. These have the smallest size and highest packing density (23mm between centres). New designed tulip type female contact on 3 pin versions and fork type on 4 and 5 pole female connectors with hard gold plating and polished contact areas. Variety of grounding options and termination facilities, UL recognized component.

TERMINATION
V = vertical pcb mount, straight pins
H = horizontal pcb mount, angled pins
HL = lateral left pcb mount
HR = lateral right pcb mount

LOCKING MECHANISM
-0 = no latch, retention spring
No suffix = latch lock

GROUNDING OPTIONS
Male Connector
-0 = ground contact connected to shell ground, but not to front panel and Pin 1
w/o suffix = separate ground contact to mating connector shell and front panel
Female Connector
-1 = mating connector shell to pin1 and front panel
-2 = separate ground contact to mating connector shell and front panel
w/o suffix = without ground / shell contact

REAR PANEL MOUNT

PANEL FASTENING
Self-tapping PLASTITE®* screw with thread 2.9x1.06 and of tri-rondular configuration (A-screw)
*PLASTITE® is a registered trademark of SFS Unimarket

PANEL THICKNESS 1 - 3 mm

FEATURES
- Smallest XLR receptacles, highest packing density
- Plastic housing, steel latch lock
- Polished contact areas and hard gold plating
- Housing flammability UL94HB
- Fitted with changeover switch
- Normally open, normally closed (NO - NC) contact
- Switch activated by inserting the cable connector